How long the buffer between private dog park bookings should be

Tags:

Operations

Dog parks and dog bars

Ana Malhotra, co-founder and CEO of Tato

Published:

What needs to happen between private dog park bookings?

Decide when the departing party must clear the shared route, what work comes next, and when the next party may arrive. Write those promises before choosing your booking buffer: the time you leave unavailable between sessions.

Use the worksheet below to turn that decision into a proposed schedule. Start with your entrance and parking area, then work through departure and reset tasks. Finish with instructions for a delay. This is a planning aid, not measured facility data or a safety standard. A calendar gap alone cannot coordinate shared paths or ensure that guests leave on time.

How much time should you leave between sessions?

Choose a trial gap from your own walkthrough, rather than treating another park’s interval as a recommended minimum.

For context, these published policies were checked on November 4, 2026. They describe individual operators, not an industry standard:

  • Wisconsin, US: Fly Dog Parks publishes a 15-minute gap between appointments. Operator policy.

  • Bishop’s Stortford, UK: Bishop’s Stortford Dog Fields asks guests to leave within their booked 50 minutes and leaves 10 minutes between users. This is an overseas policy example. Operator policy.

Treat those intervals as prompts to examine your own site. Neither establishes the gap your entrance, staff or reset work needs. The worksheet asks you to make that choice explicitly; it does not certify a safe interval.

What does your advertised session include?

Write down whether the session includes entry and departure, or only time in the play area. Then give each deadline a visible place in your guest instructions.

Use this blank worksheet for your proposed offer. Keep “leave the play area” separate from “clear the shared route.”

Decision

Your answer

What does the session include?

___

When must dogs leave the play area?

___

When must the shared route be clear?

___

What reset work follows departure?

___

Who confirms readiness?

___

When may guests arrive and unload?

___

Whom should guests contact?

___

Make the wording concrete. Instead of “please leave promptly,” fill in the actual end time and the places guests must have cleared. Name the waiting place for early arrivals. If you cannot identify a workable waiting place, revisit the route before publishing the schedule.

How do you turn the route into a changeover plan?

Walk from parking to the play area and back, recording the work in the order it must happen. Mark shared gates, narrow paths and any route staff need during reset.

Run a controlled walkthrough without customers. For each task below, record the person responsible, the minutes you observe, whether it belongs inside the advertised session or after it, and the response if it runs late. This is your working record, not a published benchmark.

Task

Record on your plan

Collect belongings and leash dogs

Person; timing; delay response

Leave the play area

Person; timing; delay response

Clear gate, path and parking

Person; timing; delay response

Inspect and reset

Person; timing; delay response

Confirm readiness for arrival

Person; timing; delay response

Count departure time once. If departure belongs inside the advertised session, do not also add that same task to the gap. Keep tasks sequential unless your route and staffing let them happen together. Leave room for the variation you observe in the walkthrough.

Check shared parking even if you have separate play spaces. Write down who checks that route before the next arrival. Do not assume separate booking calendars handle it for you.

What would a trial timetable look like?

Start with a timetable you can walk through and revise. The example below is entirely hypothetical, not observed operating data or a recommended minimum: a 45-minute session includes departure, followed by a 15-minute gap. All clock times are invented.

Time

Planned state

18:00 to 18:45

Party A’s session, including departure

By 18:45

Party A clears the agreed shared route

18:45 to 19:00

Changeover and reset; unavailable to book

19:00

Party B’s planned start

If your walkthrough needs longer, change the gap or offered starts. Do not quietly take time from the advertised session. Before opening a full schedule, try a limited pilot and record actual departures, delays and reset work against your plan.

What should you do when a changeover runs late?

Choose the contact, waiting and staff response before taking bookings. Work through these cases using your proposed instructions:

  • Early arrival: The previous car is still there. Can the next guest identify where to wait and whom to contact?

  • Late arrival: Does the guest know whether their end time stays fixed? Write your policy clearly. As an overseas example, The Bark Park Bicester in the UK states that arriving late does not change the booking’s end time. Operator policy, checked November 4, 2026.

  • Delayed reset or departure: Name who pauses entry, contacts the next party and decides what to offer if the promised start cannot be met.

  • Return to other services: Reserve the final reset before daycare or communal use resumes. Test that handoff too.

Do not treat the printed start time as confirmation that the route is clear. Put the response to a blocked route in the instructions guests receive. Use these cases as manual operating checks.

What should you bring to a Private Play demo?

Bring your completed worksheet, proposed opening windows and a delayed-departure case.

For Private Play, ask to see the session lengths and turnover buffers available for your facility, the resulting start times, and the arrival and parking instructions guests will see. Confirm your actual setup before publishing the offer.

Bring that plan when you book a demo, and walk through the next arrival with it.